Lawn Care Month by Month

    January
    The winter is firmly set in and with the hard frosts and wet ground you should avoid walking the lawn. If the ground is not frozen or waterlogged, you can remove leaves with a light rake or leaf blower. Also, remove any heavier debris such as twigs, pine cones etc. Take the lawn mower for a service.

    February
    Again, if there are frosts / frozen ground / waterlogged soil then you should keep off the lawn. If conditions allow then remove any worm casts by brushing with a broom and remove leaves / twigs with a light rake.

    March
    This is when the major work starts as temperatures are usually high enough to mean that significant grass (and weed) growth is occurring. Before cutting the lawn, it should be raked with a spring tine rake so that the grass ‘sits up’ for the mower. Adjust the mower blade height if possible so that just the tips of the grass are removed. You should only need to mow about twice in March.

    Trim lawn edges and around garden ornaments / trees using a lawn strimmer. Neaten up / repair any damaged lawn edges.

    At the end of March, scarify the lawn using an electric lawn scarifier or a spring tine rake. This will remove dead grass, thatch and moss.

    April
    Early April is a good time for over seeding (applying lawn seed to existing areas of lawn) then now is a good time to do so, make sure to vigorously rake the intended areas of over seeding before scattering the seed so that the seed ‘settles down’.

    Apply a lawn fertilizer to feed the lawn and apply lawn weed control products where necessary.

    Use a lawn aerator to aerate areas of the lawn where soil compaction has occurred.

    Continue to mow the lawn and reduce the mower blade height a little (you should not take more than a third off the height of the grass). Do not mow immediately after over seeding (at least not the over seeded areas).

    May
    Remove worm casts before mowing. Reduce the height of the mower blades, mowing will increase in frequency as the grass will be growing vigorously now due to the warmer weather and prior application of fertilizer.

    Keep edges trimmed using a strimmer or lawn edging shears.

    June
    It may be necessary to mow twice a week. If rainfall is low, then water the lawn thoroughly but not frequently to encourage deep root growth.

    If weeds are still prevalent then apply a lawn weed treatment when the soil is moist. If clover exists then rake lawn before mowing.

    July
    Mow regularly. Trim edges. Water thoroughly if rainfall low. If necessary, apply a lawn fertilizer at recommended levels to help lawn health and ‘greenness’.

    August
    Continue to mow regularly at low cutting height. Trim edges.

    If weeds are still prevalent then apply a lawn weed treatment when the soil is moist. If clover exists then rake lawn before mowing.

    September
    Remove worm casts by brushing with a broom before mowing. Continue to mow and water as necessary. Mowing frequency will start to reduce as the days reduce in length and the temperatures start to fall.

    Aerate the soil if it has been heavily trampled over the summer and then top dress the soil. Over seed areas of lawn which require it. Trim and repair lawn edges. Carry out lawn repairs including smoothing out bumps and hollows.

    Scarify the lawn in late September to remove the buildup of dead grass / moss etc. The removal of thatch by scarifying helps remove the type of environment that many lawn diseases such as red thread and dollar spot enjoy.

    If your lawn is made up of fine grass types but has coarse grass appearing in it then now is a good time to remove the areas of coarse grass and reseed with fine grass seed varieties.

    From late September keep an eye out for lawn fungal diseases.

    October
    Early October is the last chance to aerate / top dress / feed the lawn before winter if you haven’t already done so. Raise the height of the lawn mower blades and reduce frequency of mowing.

    Remove worm casts with a broom and remove any leaves / debris that has fallen onto the lawn using a rake / leaf blower.

    Keep an eye out for lawn fungal diseases.

    November

    If the lawn requires mowing, then set the mower blades high. After the last cut clean down the lawn mower and if necessary sharpen the blades or book it in for a service for sometime before February at your local mower repair specialist.

    Remove worm casts with a broom and remove any leaves / debris that has fallen onto the lawn using a rake / leaf blower.

    December
    If possible, try and avoid walking the lawn. If the ground is not frozen or waterlogged, you can remove leaves with a light rake or leaf blower. Also, remove heavier debris such as fallen branches / pine cones.

    Trackback from your site.

    Leave a Reply